Elevemotors BP350CTC 350 Cruiser Crate-Motor, Base Dressed, Carb

Elevemotors Engines New Block Casting 350 CI Cruiser Crate Engine
Dyno Tested Small Block GM Style
Carbureted, Base Dressed Longblock
HP and torque : 341 HP / 371 FT LBS, Compression Ratio: 9:2:1
Aluminum Heads, Hydraulic Roller Cam, Cast Iron Crank, and Hypereutectic Pistons
BLOCK:
NEW Elevemotors Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

ROTATING ASSEMBLY:
Cast Iron Crankshaft
3.480″ Stroke
Forged 5.700″ connecting rods
Hypereutectic pistons
Internal Front/ External Rear engine balance

CYLINDER HEADS:
Elevemotors Aluminum Cylinder Heads – H8002K
64cc chamber
2.02″ intake/1.60″ exhaust valves
195cc intake/75cc exhaust runners

CAM SPECS:
Cam Type: Roller
.477 Intake .471 Exhaust
202 Intake / 212 Exhaust duration
@ .050 – 115 degree lobe separation

IGNITION TIMING:
32 Degrees Total at 3500 RPM

ALSO INCLUDES:
Valve covers
Oil pan
Timing cover
Aluminum intake
HEI distributor
600 cfm carburetor
Dyno test results shipped with engine

WARRANTY:
30 month / 50,000 mile